Custom built to fit
each individual tent, these
frames are constructed of 1
3/8" galvanized steel tube,
angles are separate from
straight pieces and have their
own storage bag. No pieces
over 58" long. Most frames
will have 2 piece rafters and
ridge/eave poles. All
fittings are slip-fit and
flush on the surface. Corner
angles and bottom of legs are
plugged. 4-way angle at end
of ridge is for possible
porch/fly extension. Easy
setup: assembly roof section,
fit tent over it and then
raise sides one at a time and
install legs. Adjust tent to
fit, then stake down tent and
side wall ropes.
Includes 18oz. Canvas
Bags.
When
ordering an internal frame
for an existing tent,
we will need the tent
measurements- tent Width,
Length, Sidewall
Height, and Slope from ridge
to eave. |
